Freedom™ CPAP Battery

The Freedom™ CPAP Battery gives you the freedom to power your PAP device when and where you need it!

The Freedom™ is the perfect solution for outdoor and travel enthusiasts. It’s great for use in tents, RVs, travel trailers, and boats. It's also ideal for those who love to travel abroad as it meets FAA requirements for lithium-ion batteries that can be taken in carry-on baggage. 

When inclement weather strikes you can use the Freedom™ CPAP Battery as a backup power supply during power outages so you never have to worry about another sleepless night without your CPAP machine.

The easy-to-read digital display indicates the remaining charge level of the battery and if you need more power you can always pigtail two Freedom™ batteries together.

Going off the grid or just need even more time to enjoy your travel adventures? With the addition of the Auto Charge DC Cable or Sine Wave Power Inverter you can charge the Freedom™ in a vehicle and with the SunPower 40W Solar Panel you can charge the Freedom™ using the power of the sun!

As an added bonus the Freedom™ CPAP Battery features a 5V USB port and a DC input cord that let you charge most common handheld devices such as cell phones, MP3 players and tablets.

View the SPECIFICATIONS tab below to see if your PAP device will connect to the Freedom™ via the standard battery kit or if you will need an additional connection component in conjunction with the battery.  

Product image
Freedom™ CPAP Battery

Provides 12V direct current to operate most makes and models of PAP devices. View the Specifications tab for device compatibility and average run time information.

Use in a single battery configuration or pigtail two Freedom™ batteries together for even more power.

Digital display screen shows the remaining power level of the battery.

Use as a backup power supply so your PAP therapy is not interrupted in the event of a power outage.

Remain compliant with your PAP therapy no matter where your world takes you! Great for use on land, at sea or in the air.

Options for charging the Freedom™ CPAP Battery in a vehicle. 

Not just for your CPAP machine… the 5V USB port and included DC input cord allow you to power your other small electronic devices such as cell phones and tablets.

UN 38.3 tested so the Freedom™ CPAP Battery meets all current requirements for shipping via land, air or sea.

WHAT'S INCLUDED

Freedom™ CPAP Battery

AC Power Supply

DC Power Pigtail Cord

DC Input Cord

Set of 3 connector tips to fit Respironics M series, Respironics System One series and DeVilbiss IntelliPAP series PAP devices 

NOTE: Power connection components are available for Respironics DreamStation seriesResMed S9 and Air 10 series, and other PAP device models. View the Specifications tab for additional information. Please note these components are not included in the standard Freedom™ CPAP Battery Kit box but may be bundled with the kit depending upon the dealer from whom you purchase the battery.

Cell TypeIndustrial grade lithium-ion
Capacity97.68 Wh
Output Voltage Range9V-12.6V DC
Output Current8A maximum
USB Output Current5V DC | 2A
Power GaugeDigital display charge level indicator
Charge Time4 hours (per battery)
Life Span400-500 charge/discharge cycles
CaseAluminum alloy scratch resistant shell
Dimensions7.5 " x 4.8" x 0.8" (L x W x H)
Weight1.7 lbs

INTENDED USE

The Freedom™ CPAP Battery is intended to provide external battery power to PAP (positive airway pressure) devices when AC power is unavailable during travel or power outages. The Freedom™ can also be used to power or charge most common portable electronic devices such as cell phones and tablets. Use of the battery with a device that has higher amperage requirements than the output of the battery (over 8A) may cause the internal circuitry of the battery to shut off to protect from thermal runaway.

COMPATIBILITY & AVERAGE RUN TIMES

All PAP device makes and models have different voltage and direct current capability requirements which determine the type of external battery that can be used. The unique universal design of the Freedom™ CPAP Battery allows it to power most common PAP devices; however, some devices will require a device-specific connection component. Please note these components are not included in the standard Freedom™ CPAP Battery Kit box but may be bundled with the kit depending upon the dealer you purchase the product from.

Reference your specific PAP device below to determine which connection components are required. Do not attempt to connect your PAP device to the Freedom™ CPAP Battery before reading these connection instructions. If your PAP device is not listed or you have any questions please contact us at 1-877-445-5228 or info@batterypowersolutions.net.  

Please note some older obsolete PAP devices and targeted ventilation PAP devices (VPAP, SV, etc.) may not be compatible or may require more power than the Freedom™ CPAP Battery can provide.

Multiple factors will affect how long the Freedom™ CPAP Battery will power a PAP device, including, but not limited to device type, pressure setting, altitude, humidifier usage, and if an additional connection component is required in conjunction with the battery.

BiLevel devices will have lower run times as the pressure setting is not constant and changes throughout the night requiring more power to operate the device.

The use of heated humidification and heated tubing will significantly reduce expected run times by up to two thirds in most cases and in some cases could prevent the battery from being able to power the PAP device. To obtain optimal battery performance we recommend you forgo the use of heated humidification and heated tubing.

To increase average run times the Freedom™ CPAP Battery can be used in a dual battery configuration by pigtailing two batteries together. Please note that the Freedom™ CPAP Battery and discontinued C-100 CPAP Battery are not compatible due to circuit board differences and cannot be used in a dual battery configuration.

Average run times are based on CPAP devices without the use of heated humidification or heated tubing on a pressure setting of 10 cm/H2O.   

___________________________________________________________________

Respironics DreamStation Series
{Respironics DreamStation 12V Power Adapter required: BPS C-12V-DS}

Single Battery: 1-2 nights | Dual Battery Configuration: 2-4 nights

Connection Instructions

___________________________________________________________________

Respironics M Series & System One Series
{no additional connection components required}

Single Battery: 1-3 nights | Dual Battery Configuration: 3-5 nights

Connection Instructions

___________________________________________________________________

ResMed Air 10 & S9 Series
{ResMed 24V Power Converter required: BPS C-24V-RES}

Single Battery: 1-2 nights | Dual Battery Configuration: 2-4 nights

Connection Instructions: Air 10 Series | Connection Instructions: S9 Series

___________________________________________________________________

ResMed AirMini
{150W Sine Wave Power Inverter required: BPS INVERTER}

Single Battery: 2 nights | Dual Battery Configuration: 4 nights

___________________________________________________________________

ResMed S8 Series
{150W Sine Wave Power Inverter required: BPS INVERTER}

Single Battery: < 1 night | Dual Battery Configuration: < 2 nights

*Due to the internal circuitry and power demands of the S8 series the dual battery configuration is recommended.

ResMed S8 Series Device Warning: Not do not attempt to connect a ResMed S8 series PAP device to the Freedom™ CPAP Battery or 
C-100 CPAP Battery without using a sine wave power inverter as it will cause irreversible damage to the PAP device. 

Connection Instructions

__________________________________________________________________

DeVilbiss IntelliPAP Series
{no additional connection components required}

Single Battery: 1-3 nights | Dual Battery Configuration: 3-5 nights

Connection Instructions

*Note the IntelliPAP 2 Series will require the use of the 150W Sine Wave Power Inverter.

Single Battery: 1 night | Dual Battery Configuration: 2 nights

___________________________________________________________________

Fisher & Paykel ICON Series
{150W Sine Wave Power Inverter required: BPS INVERTER}

Single Battery: < 1 night | Dual Battery Configuration: < 2 nights

*Due to the internal circuitry and power demands of the S8 series the dual battery configuration is recommended.

Connection Instructions

___________________________________________________________________

Transcend
{150W Sine Wave Power Inverter required: BPS INVERTER}

Single Battery: 1-2 nights | Dual Battery Configuration: 2-4 nights

Connection Instructions

___________________________________________________________________

HDM Z1

{150W Sine Wave Power Inverter required: BPS INVERTER}

Single Battery: 1-2 nights | Dual Battery Configuration: 2-4 nights

Connection Instructions

____________________________________________________________________

3B Medical Luna & RESmart Series
{150W Sine Wave Power Inverter required: BPS INVERTER}

Single Battery: 1 night | Dual Battery Configuration: 2 nights

Connection Instructions

__________________________________________________________________

Apex Medical XT & iCH Series
{150W Sine Wave Power Inverter required: BPS INVERTER}

Single Battery: 1 night | Dual Battery Configuration: 2 nights

Connection Instructions

__________________________________________________________________

Don't see your PAP device listed above? Just give us a call at 877-445-5228 or email us at info@batterypowersolutions.net and we can let you know if the Freedom™ CPAP Battery is compatible with your device. 

The Freedom™ CPAP Battery, components and accessories are under warranty for manufacturing and quality defects for one (1) year

  • There are no reviews for this product.


Add a Review

Your Rating:

Your Review:

Your Name:

Your eMail:


Please enter the text in the image above: